Stump Grinding in Kenner, LA

Stump grinding in Kenner gets rid of the stump a removed tree leaves behind by grinding it down into wood chips, so the spot can go back to lawn, a garden bed or a new tree. Big Easy Tree Cutting grinds stumps for Kenner homes and commercial properties, and we give you a free estimate before any work begins.

A stump can sit in a yard for years after the tree is gone. It catches mower blades, trips kids and guests, and takes up space you could be using. Big Easy Tree Cutting handles the grinding with the same crew-and-cleanup approach we bring to every job. You can read more about the service itself on our main stump grinding service page.

Weathered tree stump with spreading roots among garden hydrangeas

Why grind a stump at all?

Leaving a stump in place is an option, and some people choose it. Here is what usually pushes Kenner property owners toward grinding:

  • Safety: a low stump hidden in grass is easy to trip over or hit with a mower.
  • Regrowth: some trees send up sprouts from the stump and roots after the trunk is cut.
  • Pests: decaying wood can attract insects, including wood-boring ones.
  • Space: a flat, clear patch is easier to mow, pave, plant or build on.
  • Looks: a yard without a stump in the middle simply reads as finished.

If you are weighing the options, our comparison of tree stump grinding vs. full removal covers the tradeoffs in more depth.

Clearing a Kenner lot? Check Sec. 9.08 first

Most stump jobs follow a single tree coming down in a backyard. Some are part of something bigger, like clearing a commercial site or preparing land for new homes. That is where Kenner’s rules come in.

Under Kenner UDC Sec. 9.08, a tree removal permit is required before clearing any tract of land when either of these is true:

  1. The land is zoned commercial, office, industrial or institutional and has trees 12 inches in diameter at breast height (DBH) or larger.
  2. The clearing is for a residential development over one acre.

That section is about land clearing for development. We have not found a Kenner rule that requires a permit to grind a stump on an existing residential lot. If your stumps are part of a development or a larger build, confirm with the City of Kenner what your project needs before clearing starts. Trees on the public right-of-way follow a separate city permit, which our tree removal in Kenner page explains.

Before the grinder starts: buried lines and 811

Stump grinding works at and just below ground level, which is also where service lines can run. Louisiana’s Underground Utilities and Facilities Damage Prevention Law defines “excavation” broadly, covering operations that move or remove earth by powered, mechanical or manual means. The law does not name stump grinding, so we are not going to tell you it does or does not apply.

What we do recommend is simple: treat a call to 811 as a sensible precaution before digging-type work near a stump. The state has pointed to everyday digging such as planting a tree as a reason to call 811 first, and that applies directly if you plan to put a new tree where the old stump was. Also point out anything you buried yourself, such as sprinkler lines, landscape lighting wire or a pet fence.

Across Kenner, from Rivertown to Laketown

Kenner covers a lot of ground for a Jefferson Parish suburb. It runs from the Rivertown historic district, with its museums and theaters, to Laketown, the lakefront park with a boat launch and piers. Louis Armstrong New Orleans International Airport sits inside city limits too. We offer stump grinding for residential yards and commercial properties anywhere in the city, and the approach stays the same: look first, agree on the scope, then grind.

Large tree stump with exposed roots near buildings

What is left after grinding

Grinding turns the stump into a pile of wood chips and soil. You can spread the chips as mulch in beds or use them to help fill the hole; tell us at the estimate how you would like them handled. The larger roots running out from the stump generally stay in the ground and break down over time. Our article on tree roots after removal explains what to expect from them.

How a stump job with us goes

  • Look and estimate: we check the stump’s size, what is around it, and how the grinder can reach it, then give you a free estimate.
  • Set the scope: you tell us how many stumps and what you want done with the chips.
  • Grind: the crew grinds each stump down on the agreed day.
  • Clean up and follow up: we tidy the work area and check back with you after the job.

If the tree is still standing, ask about removal and grinding together. If you are unsure whether it should come down at all, our Kenner arborist services page covers that decision.

Stump grinding near Kenner

We also offer stump grinding in Metairie and, across the parish line in St. Charles Parish, stump grinding in Saint Rose. For everything else we do in the city, see our Kenner tree service page.

Book a free stump grinding estimate

Send us a photo of the stump or tell us roughly where it sits, and we will arrange a time to take a look. Reach us through our contact page or call 504-732-9714 for your free estimate in Kenner.

Frequently Asked Questions

Do I need a permit to grind a stump in Kenner?

We have not found a Kenner rule that requires a permit to grind a stump on an existing residential lot. Kenner’s tree removal permit for land clearing covers commercial, office, industrial and institutional sites with larger trees, and residential developments over one acre. If your project falls into one of those, confirm with the city first.

Should I call 811 before stump grinding?

We recommend it as a precaution. Louisiana’s damage prevention law defines excavation broadly, though it does not mention stump grinding by name. A call to 811 is also a good idea if you plan to plant a new tree in the same spot.

What happens to the wood chips?

Grinding turns the stump into wood chips that you can use as mulch or to help fill the hole. Let us know at the estimate how you want the chips handled.

Will the roots keep growing after grinding?

The larger roots generally stay in the soil and break down over time. Some trees can send up sprouts from roots after the trunk is cut, so keep an eye on the area for a season.

Can I plant a new tree where the stump was?

Often you can, though leftover chips and old roots may affect where the new tree goes. Shifting the new planting hole away from the old stump can give the young roots cleaner soil to grow into. Call 811 before digging the new hole.

Do you grind stumps for businesses in Kenner?

Yes, we offer stump grinding for commercial properties as well as homes. For land clearing on commercial sites, check whether Kenner’s land-clearing permit applies before work begins.

Free Estimates